Process Modeling, Simulation, and Environmental Applications in Chemical Engineering

Bharat A. Bhanvase (Redaktør) ; Rajendra P. Ugwekar (Redaktør)

In this valuable volume, new and original research on various topics on chemical engineering and technology is presented on modeling and simulation, material synthesis, wastewater treatment, analytical techniques, and microreactors. Les mer
Vår pris
725,-

(Paperback) Fri frakt!
Leveringstid: Sendes innen 21 dager

Paperback
Legg i
Paperback
Legg i
Vår pris: 725,-

(Paperback) Fri frakt!
Leveringstid: Sendes innen 21 dager

Om boka

In this valuable volume, new and original research on various topics on chemical engineering and technology is presented on modeling and simulation, material synthesis, wastewater treatment, analytical techniques, and microreactors. The research presented here can be applied to technology in food, paper and pulp, polymers, petrochemicals, surface coatings, oil technology aspects, among other uses.







The book is divided into five sections:








modeling and simulation



environmental applications



materials and applications



processes and applications



analytical methods







Topics include:








modeling and simulation of chemical processes



process integration and intensification



separation processes



advances in unit operations and processes



chemical reaction engineering



fuel and energy



advanced materials



CFD and transport processes



wastewater treatment







The valuable research presented here will be of interest to researchers, scientists, industry practitioners, as well as upper-level students.

Fakta

Innholdsfortegnelse

Discharge and Pressure Loss Coefficient Analysis of Non- Newtonian Fluid Flow through Orifice Meter Using Cfd

A. Tamrakar and S. A. Yadav



Numerical Simulation of Fixed Bed Liquid Chromatography in Multiple Columns






Nag and B. C. Bag






Statistical Modeling for Adsorption of Congo Red onto Modified Bentonite

T. Mohan Rao and V. V. Basava Rao



Surface Altered Alumino-Silicate Resin (Zeolite-Y) for Remediation of Oil Spillage

S. U. Meshram, C. M. Shah, and H. J. Balani



Removal of Cr(VI) by Using Sweetlime Peel Powder in a Fixed Bed Column

R. M. Rane, S. P. Shewale, A. V. Kulkarni, and R. S. Sapkal



Removal of Cr(VI) from Waste Water Using Red Gram Husk as Adsorbent

V. S. Wadgaonkar and R. P. Ugwekar



Low Cost Adsorbents in the Removal of Cr(VI),Cd and Pb(II) from Aqueous Solution

P. Semil and A. Awasthi



Adsorption of Anionic Dye onto Tbac-Modified Halloysite Nanotubes

P. V. Mankar, S. A. Ghodke, S. H. Sonawane, and S. Mishra



Kinetic Study of Adsorption of Nickel on GNS/d-MnO2

M. P. Deosarkar, S. Varma, D. Sarode, S. Wakale, and B. A. Bhanavase



Ultrasound Assisted Synthesis of Hydrogels and Its Effects on Water/Dye Intake

R. S. Chandekar, K. Pushparaj, G. K. Pillai, M. Zhou, S. H. Sonawane, M. P. Deosarkar, B. A. Bhanvase, and M. Ashokkumar



Ultrasonically Created Rectangular Shaped Zinc Phosphate Nanopigment

S. E. Karekar, A. J. Jadhav, C. R. Holkar, N. L. Jadhav, D. V. Pinjari, A. B. Pandit, B. A. Bhanvase, and S. H. Sonawane



Biosynthesis of Silver Nanoparticles Using Raphanus sativus Extract

J. D. Jolhe, B. A. Bhanvase, and V. S. Patil, and S. H. Sonawane



Activated Carbon from Karanja (Pongamia pinnata) Seed Shell by Chemical Activation with Phosphoric Acid

M. L. Meshram and D. H. Lataye



Rice Husk Based Co-Firing Plants in India: A Green Perspective

S. U. Meshram, A. Mohan, and P. S. Dronkar



Foamability of Foam Generated by Use of Surf Excel and Sodium Lauryl Sulfate

P. Chattopadhyay, R. A. Karthick, and P. Kishore



Production of Zinc Sulphide Nanoparticles Using Continuous Flow Microreactor

K. Ansari, S. H. Sonawane, B. A. Bhanvase, M. L. Bari, K. Ramisetty, L. Shaikh, Y. Pydi Setty, and M. Ashokumar



Hydrogenation with Respect to Rancidity of Foods

D. C. Kothari, P. V. Thorat, and R. P. Ugwekar



Experimental Studies on a Plate Type Heat Exchanger for Various Applications

V. D. Pakhale and V. A. Arwari



Ultrasound Assisted Extraction of Betulinic Acid from Leaves of Syzygium cumini (Jamun)

S. V. Admane, S. M. Chavan, and S. G. Gaikwad



Separation, Analysis and Quantitation of Hesperidin in Citrus Fruits Peels Using RP-HPLC-UV

S. Kulkarni and B. A. Bhanvase



Quantification of Aluminum Metal in Cosmetic Products by Novel Spectrophotometric Method

S. B. Gurubaxani and T. B. Deshmukh

Om forfatteren

Dr. Bharat A. Bhanvase is currently working as Associate Professor in the Chemical Engineering Department at the Laxminarayan Institute of Technology, RTM Nagpur University, Nagpur, Maharashtra, India. His research interests are focused on conventional and cavitation-based synthesis of nanostructured materials, ultrasound-assisted processes, polymer nanocomposites, heat transfer enhancement using nanofluid, process intensification, and microreactors for nanoparticle and chemical synthesis. He has published many articles in international and national journals and has presented papers at international and national conferences. He has written several book chapters in internationally renowned books and applied for three Indian patents. He is the recipient of a Summer Research Fellowship from the Indian Academy of Sciences, Bangalore, India, in 2009. He has more than 13 years teaching experience. He has completed several research projects with the University of Pune. He is a reviewer for several international journals. Dr. Bhanvase completed his BE in Chemical Engineering from the University of Pune, his ME in Chemical Engineering from Bharati Vidyapeeth University Pune, and his PhD in Chemical Engineering from University of Pune, India.







Rajendra P. Ugwekar, PhD, is currently working as Associate Professor in the Chemical Engineering Department at the Laxminarayan Institute of Technology, RTM Nagpur University, Nagpur, Maharashtra, India. His research interests are focused on hydrogen energy, nanotechnology, wastewater treatment, and heat transfer enhancement using nanofluid. He has published several articles in international and national journals and has presented papers at international and national conferences. He has more than 22 years of teaching experience and several years of industrial experience as well. He has completed research projects received from the All India Council for Technical Education and has several advanced students working with him. He has worked as Head of the Department at Anuradha Engineering College, Chikhali, Buldhana, India, and at the Priyasharshani Institute of Engineering and Technology, Nagpur, India. He is trainer and motivator for entrepreneurship.







Dr. Ugwekar has completed his BTech in Chemical Engineering from Nagpur University, his MTech in Chemical Engineering from Nagpur University, Nagpur, and his PhD in Chemical Technology from Sant Gadge Baba Amravati University, Maharashtra, India.