Min side Kundeservice Gavekort – en perfekt gave Registrer deg

Advances in Polymer Blends and Alloys Technology, Volume II

From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. Les mer

1034,-
Sendes innen 21 dager
From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4)
"New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)

Detaljer

Forlag
CRC Press
Innbinding
Paperback
Språk
Engelsk
Sider
210
ISBN
9780367450960
Utgivelsesår
2020
Format
23 x 16 cm

Kunders vurdering

Oppdag mer

Bøker som ligner på Advances in Polymer Blends and Alloys Technology, Volume II:

Se flere

Logg inn

Ikke medlem ennå? Registrer deg her

Glemt medlemsnummer/passord?

Handlekurv